eNETools - The Tools are the Solution

ESS-1 Ethernet Serial Server

Description:		The eNETools, ESS-1 provides a cost-effective, small profile solution for standard serial-to-Ethernet connectivity. It is ideal for applications requiring data support for both RS-232 and RS-422 communications. The ESS-1 allows any device with a serial port, Ethernet connectivity and is ideal for serial tunneling or applications where a COM port, TCP Socket, UDP Socket, or UDP Multicast functionality is needed. Serial bridging/tunneling allows two previously non-networked devices to easily communicate information and operate with existing installed software applications on an Ethernet network. The ESS-1 also works with software applications using TCP/UDP Sockets, allowing a serial device to interoperate with the software applications without the need to install a driver. The ESS-1 is simple to install locally or remotely through most web browsers or our supplied configuration utility. The included "Device Installer" utility application will automatically detect all ESS-1 devices on your network. A Set up guide is provided to make network configuration hassle-free. The ESS-1 is FCC part 15 verified and is intended for commercial use only. The small profile of the ESS-1 makes installation hassle-free.
Features:		10/100 base-T auto-sensing Ethernet port with Link & activity indicator - Full/half duplex operation. Supported protocols: TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and AutoIP. Device Installer setup utility supplied. COM port redirector driver supplied Serial port baud rates from 300 to 920K baud. RS-232 serial port with flow control. RS-422 serial port via plug-in euroblock screw terminals. LED indicators for Power, TX and RX data. Wide range input power requirements from 7.5 to 34 VDC. 9 VDC wall transformer supplied. (Optional CE certified 240 VAC power supply available). Small profile packaging.